Kreg 520PRO Pocket Hole Jig
Build Pocket Hole Projects Anytime, Anywhere! The Kreg 520PRO is the most versatile Kreg Jig yet. Whether you need to be at a job site or in your back yard, the Kreg 520PRO goes where you go, allowing pocket hole construction at any location.
Key Features:
-
Supremely Adaptable to any workspace. It doesn't matter if you need to use the jig on top of a work surface, or clamp the jig directly on to your project, the Kreg 520PRO has you covered.
-
VersaGrip Handle rotates 360° to accommodate potential obstructions or tight spaces. Just pull the trigger and the clamping handle locks your workpiece in place. The clamping mechanism will work on any thickness from ½-inch to 1½-inches thick.
-
Gripmaxx Material on the front of the drill guide block for additional holding power and defense against slippage.
-
Easy Guide Block Set Up with positive preset stops corresponding to ½, ¾, and 1½-inch material thickness.
-
Easy Stop Collar Set Up using the thickness gauge/hex key combo and pre-marked drill bit. Just measure the thickness and place the stop collar at the corresponding mark on the bit. Stop collar, thickness gauge/hex key combo, drill bit, and 6-inch square drive bit included.
-
Built To Last with a steel reinforced spine and a lifetime warranty on the drill guide bushings, the Kreg 520PRO should provide many, many years of service.
-
But Wait, There's More! The 520PRO is also compatible with the Kreg 530 Micro-Pocket Drill Guide, allowing 25% smaller pocket holes for narrow or thin stock. Plus, it comes with a 2-inch Kreg Face Frame Clamp to assist with project assembly. The cup truly runneth over with this virtual cornucopia of form and function
Kreg 530 Micro-Pocket Drill Guide
Need even more versatility for your Kreg Pocket Hole Jig? Kreg Pocket Hole Jigs are perfect for quickly and efficiently joining material , but sometimes you need to create smaller holes for your project. Whether you have ½-inch or narrow stock, even if you just need smaller holes for extremely hard wood that is difficult to drill with a larger diameter bit, the Kreg 530 Micro-Pocket Drill Guide provides an elegant solution.
Key Features:
-
Includes Micro-Pocket Drill Guide Block; Easy-Set Micro-Pocket Drill Bit and Stop Collar; Hex Key; and Material Thickness Gauge
-
Simply snap the Kreg 530 into the corresponding slot where the standard drill guide normally fits or your 500-Series, and it's ready to use
-
Create a 25% smaller smaller pocket hole appropriate for narrow and thinner stock
-
Also useful for materials that may be difficult to drill with larger diameter bits
*Please Note: The Kreg 530 is only compatible with Kreg 500-Series Jigs, such as the Kreg 520PRO. For Kreg 700-Series Jigs, you will need the Kreg 730 Micro-Pocket Guide.