Featured

Incra 1000HD Miter Gauge - Solid Engineering, Precise and Adaptable

Incra Miter 1000HD Miter Gauge

The NEW INCRA Miter 1000HD is the perfect mitering solution for your table saw. With 180 AngleLOCK Indexing stops!

The INCRA Miter 1000HD is a highly accurate, compact solution for general woodworking featuring an 18"-31" telescoping fence, INCRA Flip Shop Stop, 180 positive angle stops, and a 1/10° vernier cursor.

The adjustable miter bar fits 3/8" deep miter slots measuring between 0.740" and 0.765" wide. The HD stands for High Definition owing to the fact that the protractor's plate has an incredible 180 can't-miss angle stops in 1° increments with special stops at 22.5°.

Combine that high-resolution protractor with the industry's smoothest adjustable miter bar, a telescoping IncraLOCK Cut-off Fence & Flip Shop Stop, and a steel vernier scale that reads to 1/10 degrees, and you've got a winner that will improve the quality of any project.

Let's look at all this a little closer...

The plastic washers (multiples provided) adjust to fit to the miter slot of your saw for a perfect and smooth fit. — The plastic washers (multiples provided) on the miter bar adjust to fit to the miter slot of your saw for a perfect and smooth fit.

The miter head has 180 laser-cut angle stops every 1° over 180° range, and the 1/10th° plate allows even more accuate settings.

The telescoping fence adjusts between 18" and 31" to fit almost any task.

The rule on top of the telescoping arm makes it easy to set an exact length, and then lock the arm in place.

The two piece flip stop has different bars to allow the fence to move as one piece, or to set two stops that work independent of one another. — The two-piece flip stop has different bars to allow the fence to move as one piece, or to set two stops that work independent of one another.

At the rear of the flip stop, the two rear nylon screws lock in the gross adjustment, while the side know (pointing) allows for micro adjustments to the setting.

One last detail, the Incra Miter 1000HD easily accepts sacrificial fences to protect your gauge, and the flip stop is designed to move and adapt with the addition with very little effort.

If you're looking for an upgrade to your miter gauge that will provide laser precision and features that just don't stop, the Incra Miter 1000HD has you covered!