The Infinity Tools Pepper Mill and Salt Shaker Combo Turning Kit includes all the hardware needed to create this fun project. All you need to supply are the tools and wood. Fortunately, we offer most of the tools if you don't already have them. For a great money-saving deal, check out the Famag Boring Kit for Pepper Mill and Salt Shaker Combo (101-951), specifically assembled for this project kit. The only thing we don't carry is the wood, and the great thing about turning is you can use pieces that may otherwise be considered offcuts or scrap.

Features:

• Ceramic grinder mechanism will not corrode
• Nickel Plated Salt Shaker Cap and Adjusting Nut
  • gunmetal, almost black, finish that imparts a sleek, refined look to your piece
• Stainless Steel Grinder Shaft
  • A plastic Grinder Sleeve fits over the grinder shaft and extends through the salt reservoir at the top, protecting the shaft from corrosion
  • The flared base of the Grinder Sleeve also aligns the top salt shaker portion with the bottom pepper reservoir

Tools and Supplies You May Need:

• 1-1/2" Forstner Bit (101-936)
• 1-1/16" Forstner Bit (101-929)
• Bit Extension (101-967) (*optional)
• Morse Taper Adapter (101-968) (*optional: for use if you plan to bore the blank on the lathe and do not already have a drill chuck for the tail stock)
• 7/16" Drill Bit
• Head Stock Drill Chuck
• 1-1/2" Expanding Rubber Jam Chuck (*optional: you can also turn your own tapered or stepped jam chuck if desired)
• Large Diameter 60° Live Center For Tail Stock
• Turning Tools Necessary To Create Your desired Profile
• Wood Blank of Your Choice
• Screwdriver
• Drill Press (*optional: for use if you do not plan to bore the blank on the lathe)
• Lathe