The MicroJig Splitter Steel PRO Virtually Eliminates Kickback & Burn Marks!

The SteelPRO uses a stainless steel core coated with high density plastic for significantly improved durability and resilience. This new splitter system utilizes a patented "Automatic Kerf Keeper”. The Kerf Keeper is a separated tab installed behind one of the SteelPRO Splitter inserts that is automatically ejected from its station once the saw kerf begins to close. A closing saw kerf posses a great danger to the user because the board may bind the saw blade and kickback. The Automatic Kerf Keeper deploys when the board pinches the Kerf Keeper and pulls it out of its position—not only does this keep the kerf wedged open, it signals to the user the kerf is closing and the saw should be turned off.

The SteelPRO Splitter offers another unique approach to table saw safety: the “Double Splitter” technique. By placing two splitters back-to-back behind the saw blade, the SteelPRO System allows the user to offset one splitter towards the fence to control the keeper-piece and offset the other splitter away from the fence to control the off-cut piece. The Double Splitter technique greatly improves safety by reducing the occurrence of kickback from both sides of the saw blade. The MJ Splitter SteelPRO System is available for 1/8” kerf saw blades and thin kerf saw blades. The SteelPRO System can be easily installed into a Zero Clearance Throat plate on most table saws.

Please note: The Full Kerf version is for 1/8" thick blades and the Thin Kerf version is for less than 1/8" kerf blades. Both are to be used when making 90-degree cuts only.

Both Kits Include:

• One drill guide
• One 3/16" drill bit
• Four MJ Splitter SteelPRO inserts
• Three Automatic Kerf Keepers
• Five #8 x 1/2" washer head wood screws
• Installation instruction sheet
• Warranty registration card

Click here to see our table saw Zero Clearance Insert Plates

Don't miss our safety blog post here.