Make Precision Drilled Counterbore& Countersinks With Your Plunge Router!

LAMINATE - PLYWOOD - SOFTWOOD - HARDWOOD

These exclusive new solid carbide drill & countersink and counterbore router bits will allow you to make clean and accurate pre-drilled holes with your plunge router. Designed for #6 and #8 screws, you'll be able to rout countersunk and counterbored holes with the precision and quality only a solid carbide router bit and your router can give you. You could use your standard countersink drill setup to make a countersunk or bored hole but we all know that steel drills just dont last long. Also, the typical steel drill and countersink don't perform very well in more abrasive material like laminates and they tend to leave a less than idea surface finish when used on delicate material like veneered plywood.

Our Solution...a high quality solid carbide router bit that is designed to make hundreds of holes before sharpening! Drill the pilot hole and the 82° countersink or flat counterbore in one operation. You'll marvel at the quality of the finish they leave on the surface of your material and you'll be impressed with how long they last compared to your standard steel drill and countersink bits.

Use These Router Bits For...

• Dril pilot hole and flat couterbore in one operation
• Dril pilot hole and 82° countersink in one operation
• Tough material like laminate tops
• Delicate material like veneered plywood

Purchase both bits and save!