"I recently finished a project with 14 raised panels. I raised them with your insert panel cutter. Over the years, I have used many different "premium" cutters. Yours is by far the best I have ever used. I congratulate you on this superb system."
"I have recently purchased the Infinity Combo-Max saw blade and Glue Joint Router Bit. I am totally pleased with these tools. I have owned many different saw blades and router bits in my 50 years of woodworking and these rank among the best I have owned."
Setup Lock Miter joints in minutes, with minimal setup and without the headaches! Inlcudes both Lock Miter Master setup jigs.
New & Exclusive - Setup Up Perfect Fitting Lock Miter Joints In Minutes - Without The Headaches!
This package includes both Lock Miter Jigs, items LMM-002 and LMM-003
INVENTORY UPDATE 10/22/2014:
This Lock Miter Master Package has been so well received that we're curently sold out of the smaller LMM-002. They are expected to come back into stock on 11/17/2014. You can still order this package, though, and we will ship your larger LMM-003 jig up front while we await the resupply of the LMM-002.
We've all been there; we grab our cup of coffee and head out to the shop with great enthusiasm and vigor, excited by the prospect of making gorgeous Locking Miter joinery. About 1/2 hour later (and $$ in wasted wood) we throw up our hands in frustration only to banish our prized lock miter bits to the back of the bit storage rack. But you thought you had it, right? Only a small adjustment in bit height and it'll be perfect, or should you adjust the fence depth? Make the wrong adjustment and you'll be farther than you were before you started. So what went wrong and why are those bits tricky to setup? For starters, the lock miter profile is one of the few that requires precision in both the X and Y axis. The trick is to find the centerline of your material and match it up with the centerline of the profile, doesn't sound too difficult, I mean we are woodworkers after all, right?
Don't despair, our Lock Miter Master jig is a simple, yet precisely machined, setup-aid for use with lock miter router bits (in table mounted routers only). Unlike other setup jigs or blocks, it's easy to use and open up new locking miter joint possibilities. It requires zero math calculations and virtually no trial and error cuts. With these jigs you can quickly and easily set the proper bit height AND fence position for precise-fitting standard and special case lock miter joints. They attach securely to your router bit with rare earth magnets and are precision milled with engraved reference lines that make it easy to set-up flawless standard lock miter joints and a variety of special lock miter joints only possible with the Lock Miter Master.
I have put in countless hours making setup blocks for lock miter bits, and they are only good for whatever thickness wood you are cutting at that time. These jigs take wood thickness out of the equation by using a center line.
After reading the description of this set, I knew full well before purchasing, that they may not work for my bits at all. I was fairly lucky in that the large jig works fine with my large bit. The small jig on the other hand does not work with my small bit, but may work fine on mid size bits. For a lock miter bit to work with one setup they have to have the same geometry. So, needless to say, the small jig also works on my large bit, and in some cases may be easier to use than the large jig. I may take the small jig to the sander and remove the small area at the bottom causing interference.
All things considered, if you value your time at all, dont hesitate to buy these. The first time you use one it pays for its self.
- Tom Brooker, WA
Fantastic Lock Miter Master Jig Set
After experiencing extreme difficulty in properly setting up my lock miter bits, I just gave up and watched my lock miter bits gather dust for years.
PROBLEM SOLVED with the Infinity Tools Lock Miter Master Jig Set!!!
Perfect lock miters the FIRST time I used their wonderful set of jigs. No more time consuming trial & error cuts. No more having to spend a lot of time setting up my table saw for precise miter cuts and then dealing with hidden splines.
Using my CS-2 Center Scribe from Bridge City Tool Works, I simply drew thin center lines on adjacent edges of my stock. The rest was a piece of cake.
Because I make jewelry boxes from 3/8 stock, and use wider stock from time-to-time, I purchased the 2 piece set.
MY ONLY WISH is that Infinity Tools would quickly make available a Lock Miter Master Jig Set for 22.5 degrees which would be great for my 8 sided boxes.
And, at their price for the jig set, WHAT A SUPREME VALUE.